Kabel Solar Panel Lapp H1Z2Z2-K
LAPP Solar Panel Cable H1Z2Z2-K, kabel panel surya
Benefits
- For outdoor applications
- Robust against mechanical impacts, Burial in professionally made cable trench inside or without protection system
- Reduction of flame propagation and of toxic combustion gases in the event of fire
- Inside the EU, and particularly on site, applicable for many building types as per local, legal implementation of EU CPR – Construction Product Regulation (EU) No. 305/2011, thanks to Dca Classification
- 25 years in expectable lifespan under normal use conditions as defined in EN 50618
Application range
- For free and stationary or for freely suspended outdoor and indoor cabling between the solar modules, or between the module strings and the DC/AC inverter, for example in line with HD 60364-7-712 on PV systems, and EN 50618 on H1Z2Z2-K cable type, etc….; Short circuit and earth fault protected per EN 50618, Annex A, and per HD 60364-5-52
- As per EN 50618, Annex A, inside electrical installation pipe/ duct/ channel, plaster, and appliance, as well as inside or connected to double insulated/ protected appliance or system of protection class II
- Photovoltaic systems with DC system voltage up to 1800 V to ground
- AD8: Permanent water contact and submersion down to 1 metre in water depth
- Increased, mechanical robustness, for instance in the event of impact;
Burial in Ground in professionally made cable trench (see Section 4.2 of VDE 0891-6, or Section 300.5 in Article 300 of NFPA 70/ NEC – National Electrical Code of the USA) with or without additional protection system, such as tube/ duct/ conduit for burial in ground;
Where additional protection system for burial in ground is used, internal waterlogging of contaminated water in contact with the cable’s outer sheath must be avoided.
Product features
- Weather/ UV resistant per EN 50618, Annex E, as well as ozone resistant per EN 50396;
Transversely watertight “AD8” per IEC 60364-5-51/ HD 60364-5-51, IEC 62440, and EN 50525-2-21 down to 1 metre in water depth - Flame retardant per IEC 60332-1-2, and Dca classified per EU CPR – Construction Product Regulation (EU) No. 305/2011
- Halogen-free according to IEC 60754-1 (amount of halogen acid gas),
Low Corrosiveness of combustion gases according to IEC 60754-2 (degree of acidity) - Good notch and abrasion resistance
- Tested against burial-related, mechanical UL 854 Tests Impact-Resistance and Crushing-Resistance
Classification ETIM 5
- ETIM 5.0 Class-ID: EC001578
- ETIM 5.0 Class-Description: Flexible cable
Classification ETIM 6
- ETIM 6.0 Class-ID: EC001578
- ETIM 6.0 Class-Description: Flexible cable
Conductor stranding
- Fine wire according to VDE 0295,
class 5/IEC 60228 class 5
Minimum bending radius
- 4 x OD
Nominal voltage
- AC U0/U: 1.0/1.0 kV
DC U0/U: 1.5/1.5 kV
Max. permissible DC operating voltage: 1.8 kV
Test voltage
- AC 6500 V
- DC 15000 V
Current rating
- Im compliance with EN 50618, Table A.3
- Acc. to EN 50618, reduction factors for clustered wiring per… HD 60364-5-52
Temperature range
- >Conductor…, max., per EN 60216-1: 120°C;
>Conductor…, max., short-circuit/ earth fault (period of max. 5 s): 250°C;
>Ambient…, min., stationary use: -40°C;
>Ambient…, min., flexible use or during installation: -25°C;
>Ambient…, max., in conjunction with EN 60216-1: 90°C;
>Ambient…, constant, in conjunction with HD 60364-7-712: 70°C to 90°C;
>Ambient…, ambient temp. related reduction factor 1.00: 60°C;
>Ambient…, max., storage: 40°C
Melayani penjualan dan pengiriman :
DKI Jakarta, Jakarta Pusat, Jakarta Selatan, juga Jakarta Utara, Jakarta Timur, Jakarta Barat, Bekasi, Tangerang, Lampung, Banten.
Jawa Barat, Cikarang, Cibitung, Karawang, Banten, Depok, Cirebon, Bogor, Bandung, Sumedang, Sukabumi, Purwakarta, Indramayu, Cirebon, Tasikmalaya, Cimahi, Ciamis.
Provinsi Jawa Tengah Semarang, Kudus, Jogja, Solo, Surakarta, Magelang, Demak, Purwakarta, Purbalingga, Salatiga, Yogyakarta, Jepara, Banjarnegara, Banyumas, Tegal
Jawa Timur, Surabaya, Malang, Batu, Sidoarjo, Gresik, Pandaan, Jombang, Mojokerto, Probolinggo, Jember, Kediri, Madiun, Banyuwangi, Madura, Tuban, Lamongan, Bangkalan ,Cepu , Bojonegoro, Pacitan, Tulungagung, Pasuruan, Blitar, Trenggalek, Ponorogo
Bali, Denpasar, Singaraja, Bima, Lombok, Sumbawa, Mataram, Kupang, Flores, Atambua, Ende, Timor Leste, NTT, NTB
Sumatra Kabupaten dan Kota, Sabang, Aceh, Bengkulu, Medan
Sumatra Utara, Jambi, Sumatra Utara , Sumatra Barat, Palembang, Sumatra Selatan, Pekan Baru, Dumai, Padang, Lampung, Bangka Belitung, Batam, Bukittinggi
Riau, Bengkulu
Kalimantan Kabupaten dan Kota, Banjarmasin, Samarinda , Kalimantan Utara , Balikpapan, Pontianak, Palangkaraya, Bontang, Kutai Barat, Berau
Provinsi Kalimantan Timur, Kutai Timur, Tarakan, Bontang, Singkawang, Sambas, Barito, Banjarbaru, Sangata, Tanjung, Tanah Grogot
Kalimantan Selatan, Kalimantan Tengah, Melawi, Kotabaru, Balikpapan, Bontang, Kutai Timur, Kutai Kartanegara
Sulawesi Palu, Manado, Makassar, Luwuk , Kendari, Parepare, Toraja, Ambon, Maluku, Gorontalo, Sulawesi Selatan, Sulawesi Barat, Sulawesi Tengah, Sulawesi Utara.
Papua Jayapura, Manokwari, Sorong, Timika, Merauke, Raja Ampat.
